4: Remove Bezel

Starting from either side of the display assembly, insert your fingers between the LCD screen and the front plastic bezel. The plastic bezel will usually snap off fairly easily. If it does not, work the plastic in different directions until it unsnaps or look closely for overlooked screw covers. Work your way around the top and take care around the latch as it may need to be pressed when unsnapping.

Note: Other laptops may require you to begin inserting your fingers at the bottom of the plastic bezel.

To unsnap the two bottom corners of the bezel, you will need to use your index finger on the outside of the display assembly as shown in the photo below.

After unsnapping the plastic bezel on both sides and on top, lean the display assembly as far back as it will go. Either insert your fingers between the plastic assembly and the LCD screen at the bottom corner or try using your index finger on the outside corner to pry it open. After unsnapping the bottom corner continue unsnapping the plastic bezel along the bottom of the display assembly until completely removed.